Produto utilizado basicamente entre 2008 e 2010 quando eu tinha carro e disposição pra não ter porta-malas hehe. Ele ficava preso no porta-malas, por isso algumas marcas na carcaça, mas o amp funciona perfeitamente. Tenho a caixa original, manual e tudo mais que o acompanha na compra de um novo. Testo na frente do comprador no momento da venda, só paga após ver funcionando.
Informações retiradas do site: http://www.diamondaudio.com/
Manual do proprietário: http://www.diamondau...manual-2007.pdf
Diamond Audio D3 1000.1 - Mono Amplifier
1000 Watts RMS Output Power
(Single Channel Driven):
(Into 4 Ohms) 400w x 1
(Into 2 Ohms) 600w x 1
(Bridged into 1 Ohms) 1000w x 1
All Diamond Audio D3 Series Amplifiers Feature:
• Pulse Width Modulated (PWM) MOSFET Switching Power Supply
• Extruded Aluminum Heatsink
• Double sided PC boards
•Nickel Plated RCA Low Level Audio Inputs
•Nickel plated, low resistance power and speaker connector blocks
• Power ON and Protection LED Lighting for Easy Diagnostics
• Thermal, Short Circuit, and Overload (Low Impedance) Protection
• 12 dB bass boost
• Chassis mounted ATC/ATO type automotive fuses
• Proudly Designed and Engineered in the USA
D3 1000.1 Features
•Class D Mono Amplifier Topology- D3 1000.1
• High Current Output Capability (2 or 1 Ohm)
• Internal 12dB/Octave Low Pass Filter (50-250Hz)
• Bass Boost EQ (0 to +12dB) at 50Hz
• Remote Level Control for Dash Mounting
• Intended for use on subwoofers
Frequency Response: 40Hz to 250Hz +/-3 dB
Signal to Noise Ratio: >70dBA (40 to 250Hz)
THD+N(Total Harmonic Distortion + Noise) <0.2% (Output-1W 4 Ohms)
RCA Input Sensitivity: 150mV to 4V
RCA Input Impedance: >20K Ohms
Min to Max Voltage requirements 11V to 15.5V DC
Low Pass Crossover: 12dB/Oct, 50-250Hz Variable
Crossover Configuration: Low Pass
Bass EQ 0 to 12dB @ 50Hz (Variable)
Motivo do Anúncio: Falta de uso.
Minha localização: São Paulo/SP - Mooca.
Contato: (11) 972225324 e rafael.lucchesi@gmail.com
Abraços !
Valor: 600
Telefone ou E-mail: rafael.lucchesi@gmail.com
